Sep 17, 2018 | By Thomas
Lockheed Martin Australia and Deakin University’s Institute for Intelligent Systems Research and Innovation (IISRI) have partnered on a 12-month development program to extended the capability of Lockheed Martin’s FORTIS Exoskeleton.
The FORTIS is an unpowered, lightweight exoskeleton designed by Lockheed Martin that is able to support tools of up to 16.3 kilograms (36 pounds) and transfer that load from a worker's hands and arms to the ground. The goal is to lighten workers' loads and improve worker safety. Lockheed Martin licensed B-Temia's bionic augmentation technology called Dermoskeleton to incorporate into its exoskeleton program in April 2017.
The IISRI team used biomechanics to test the ergonomic effects of using power tools on the human body by using motion capture obtained from sensors on the arms and shoulders of exoskeleton operators and analyzed by signal processing techniques.
Deakin IISRI researchers also designed and 3D printed new attachments to expand the functionality of the FORTIS Exoskeleton, allowing it to accommodate external loads usually mounted on the back of the human body.
James Heading, business development senior manager, Lockheed Martin Australia, commended the Deakin research team and outlined the inherent challenges associated with exoskeleton research.
“Originating from Lockheed Martin’s exoskeleton research to assist soldiers to carry heavy equipment over long distances, the same principles of how the body works and expends energy were applied to exoskeleton development for use in industrial settings," Heading said.
“The technology supporting the exoskeleton may look simple but developing technologies that are a help and not a hindrance is a deceptively difficult engineering task. No two people are the same, so the exoskeleton needs to be designed to adjust and fit any sized person and accommodate different anthropometry,” he concluded.
Dr. Hossny, Senior Research Fellow, IISRI at Deakin University, commended the research project, led by Darius Nahavandi as part of his Ph.D. research, for identifying the importance of biomechanic analysis of assistive devices.
“The project has accelerated the design-testing loop for designing and tuning exoskeletons,” he said. "There is often a trade-off to be considered when adopting assistive devices in theworkplace. While assistive devices help channel the load through the skeletal structure of the exoskeleton, our work optimizes the operator’s movement so they are able to cope with increased repetition and indirect loads during motions,” he explained.
Other IISRI researchers involved in the project were Navid Mohajer, Imali Hettiarachchi and Julie Iskander.
Posted in 3D Printing Application
Maybe you also like:
- Awesome 3D printed Millennium Falcon took 10 days to complete
- WASP releases modular Crane WASP infinity 3D printer for construction
- Zortrax enters resin 3D printing market with Zortrax Inkspire 3D printer
- Moritz Simon Geist 3D prints sonic robots to play electrifying techno music
- New SCRIM 3D concrete printing uses mesh to produce lightweight structures
- Volkswagen plan to use 3D metal printing for mass production
- uDiamond: VTT and Carbodeon speed up 3D printing with nanodiamonds
- Carbon introduces medical-grade MPU 100 resin, teams with Fast Radius to redesign Steelcase SILQ Office Chair with 3D printing
- IKEA is using 3D printing to design ergonomic chair, the Ubik, for gamers
- Team Penske is using carbon fiber 3D printers for race car parts